RotorStumper

Located In Vancouver, B.C Canada

Tel/Fax: (604) 524-6469 Cellular: (604) 329-1659

Call Today

Jack@rotorstumper.com

Rotor Hydro 26/40 with cylinder

Rotor is pleased to introduce the new Rotor Hydro 26/40, the hydraulic model top of the range, applicable on excavators, diggers and others earth-moving machinery equipped of hydraulic systems and weight range from 26 to 40 tons. 
Can be equipped of cylinder tool (for extraction) with diameter of 700 mm (1200 mm max) and of drill tool (for destruction) with 1.200 mm of diameter.

Technical Data

 

Model Rotor Hydro 26/40
Absorbed power 180-350 Hp (135-260 Kw)
Weight Kg. 2500
Drill operative diameter 100 cm (130 cm optional)
Cylinder (optional) 70 cm
Bladed ring (optional) 120 cm

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
I had purchased a ranch with 150 hectares (about 370 acres) with a eucalyptus forest. The forest had several eucalyptus species (red, white, globules, maidens), of which red is the hardest. We were able to clear all of the stumps, but the red did take more time. The key factor was stump diameter; It works well in stumps with 20 inches or less diameter. If they are bigger, it is not easy to remove the stumps. We worked with a 140 HP John Deere tractor, and we were able to clear about 1 acre/6 hour. With a bigger tractor, you might be able to go faster. The stumper is virtually maintenance-free other than the blades. A set of blades lasted about 20 -25 acres. If there are many rocks in the soil, these will break the blades. Also, the blades need sharpening every three or four hours. The works are tedious, and it does take a lot of person-hours, but the results are outstanding. We have used the cleared land to implant pastures (ray grass 7 white clovers) for cattle and grow sorghum and oats for cattle feed.
Paul M.
Designer